Fitting instructions · NFC-PLAQUE
NFC Scan Plaque
Sits under a racket or a shoe. Customers tap their phone to open any webpage, social account or link.
| # | Part | Material | Qty |
|---|---|---|---|
| 1 | Plaque body | PLA | 1 |
| 2 | NFC sticker · 30 mm round | NFC tag | 1 |
| 3 | Logo cap · press fit, swappable | PLA | 1 |
| 4 | Wall screw · not supplied | Steel | 2 |
| 5 | Wall plug · not supplied | Steel | 2 |
Steps · Direct to wall
- Mark the two holes on the wall using the part as a template. Check it is level.
- Drill and plug the holes to suit the wall. Screws and plugs are not supplied.
- Stick the NFC tag into the recess in the socket, then press the logo cap in until its rim sits flush.
- Screw the part to the wall through the countersunk holes.
- To fit the NFC Scan Plaque under the rack, seat its tongue in the channel on the front of the rack and use screws 5 mm longer, through plaque and rack together.
Dimensions
46 mmWidth
46 mmHeight
21.5 mmDepth
Questions about fitting? Email padelracketholders@gmail.com.
View product and reorder